[. . . ] 1 Open the visor until the small arrow on the mechanism matches the sign on the visor. [. . . ] 4 Starting from the side of the movement lever, lower the smoke visor even further beyond the front edge rim of the shell and then extract it by pulling it gently. 2 Introduce the left side arm of the smoke visor in line with its seat until the brass screw is visible (Pic. Tighten the screw C to secure the smoke visor arm to the movement lever. Do not use the smoke visor during late night hours or in scarce visibility condition. To remove the inner padding you can start either from the right or left side. 2 Starting from the neck device, remove the lining by pulling slightly towards the inside of the helmet (Pic. Still pulling gently, release also the lateral fixing strips F and the fixing plastic frame in the front E (Pic. CLEANING THE WASHABLE LINING The comfort padding liner is treated with the SANITIZED® process which provides both the anti-bacterial and anti-fungous action. [. . . ] WIND STOP The wind stop device prevents cold air enterering from below. [. . . ]